Prevent Control Valve Leakage With Everlasting Valves
03-14-22
According to a recent EPA survey, more than 40,000 tons of fluids are emitted and lost from tankers due to leakage. If you are one of those who have experienced this issue in your organization, then you know that there is no easy way to fix it. However, if you want to prevent valve leakage from happening again, you need to do something about it immediately. Well, in this article, we will be sharing some information about control valve leakage. Read through also to understand control valve requirements.
Control Valve Application
A control valve is used to regulate the flow of liquid. In other words, it helps to control the amount of liquid that flows through the pipe. It does this by opening and closing the pipes. When the pipes are open, then the liquid can flow freely. On the contrary, when the pipes are closed, then the liquid cannot flow. Leakage in a control valve occurs when the liquid leaks through the joints between the pipes.
Causes Of Control Valve Leakage
There are several causes of valve leakage. Some of these include:
Improper Installation
If you have installed your control valves improperly, then you might not realize it until you notice water leaking out of your faucets. You should never install your valves without first checking whether or not they’re properly secured.
Poor Maintenance
It’s also possible that your valves have been neglected over time. They could become worn out due to constant use. As such, you’ll need to replace them before they break down completely.
Faulty Parts
The parts of your system that are responsible for controlling the flow of water may fail to work as intended. For example, if you have an old-fashioned ballcock valve, then it’s likely that its internal components will eventually wear out. It’s best to get your valves replaced when they start malfunctioning.
Damaged Pipelines
Damaged pipelines can cause leaks in your entire system. To find out if this is the case, you should check all of your pipes for cracks and other damage.
Everlasting Valve
Our valves have been created to prevent leakage or evaporation of liquid from fluid storage tanks.
Specifications
This valve can handle pressure ranging from 10 psi to 200 psi. It is made using stainless steel material. The valve comes with a lifetime warranty.
How Does The Everlasting Valve Work?
When you fill your tank with fluid, the Everlasting Valve automatically closes the opening of the tank. As soon as the fluid level reaches the top of the Everlasting Valve, it opens the tank’s opening. When the Everlasting Valve detects the presence of air inside the tank, it closes the opening again.
Why Should You Use Everlasting Valves?
There are many reasons why you should consider using Everlasting valves instead of other types of valves. Some of them include:
Prevents Tank Leaks
Most people experience liquid leaking from their tanks when they don’t use any kind of valve on their tanks. If you have ever experienced such a problem, then you know how frustrating it can be. If you are not using a valve on your tank, there is always a chance that the fluid could leak out through the tank’s cracks. Everlasting valves eliminate this issue because they keeps the tank sealed until the liquid level reaches its maximum capacity.
Reduces Corrosion
Another advantage of using Everlasting valves is that they reduce the chances of corrosion. Conventional valves usually allow water to flow into the soil around the tank. When the fluids gets contaminated with dirt and bacteria, it causes the formation of rust.
Extends The Life Of Your Storage Tanks
One of the most significant advantages of using Everlasting valves is that they extend the life of your storage tanks. As mentioned earlier, conventional valves often cause corrosion. This leads to the deterioration of the tank walls over time. However, installing our valves on your tank helps keep the tank walls intact for longer periods. These are just some of the benefits of installing Everlasting valves on the storage tanks.
Factors That Affect The Performance Everlasting Valves
To get the best performance from Everlasting valves, you need to ensure that all factors are taken care of. The factors include:
Make Sure That The Valve Is Installed Properly
You must ensure that the valve is appropriately installed. You need to make sure that the valve completely covers the tank so that no fluid leaks out. If you do not follow this step correctly, you will have the same problems that you were trying to avoid in the first place.
Check The Pressure Range
Before filling your tank with water, check the range of pressure that our valves can handle. This is done by placing the valve under a high-pressure hose.
Keep an Eye Out For Air Bubbles
Air bubbles can also affect the performance of valves. Make sure that you remove all the air bubbles before filling the tank.
Clean the Tank Regularly
Cleaning the tank regularly is another crucial factor. Make sure that you clean the tank at least once every month. You should also make sure that you use a good quality cleaner and regular valve maintenance.
Get an Everlasting Valve Today!
If you want to avoid control valve leakage, then you need to take some precautions. For example, you need to follow these steps:
- Make sure that your pipes are properly installed
- Keep an eye on the temperature of the water
- Check if the pipes are clogged
With Everlasting valves, you will never have to worry about having a problem with the control valve again. They are designed to last for decades. For more insights on Everlasting valves and control valve products, please contact us today.